diff --git a/README.md b/README.md
index cb38fb460e27d0d86c3afaddeb5ccb10013533b4..e7d39987c0f42c8f70a30f488ac1f1d3563a8d3d 100644
--- a/README.md
+++ b/README.md
@@ -3,7 +3,7 @@
 This code allows you to control a stepper motor with a momentary switch button.
 
 ## Using the Winder
-On powerup, the LED will fade on an the winder will be in standby, waiting for a button press.
+On powerup, the LED will fade on and the winder will be in standby, waiting for a button press.
 
 The button knows two types of inputs:
 * **press**, which is input shorter than 500ms
@@ -12,11 +12,11 @@ The button knows two types of inputs:
 The winder works in cycles, which means it will do the configured number of cycles (`CYCLES`), with each cycle consisting of a configured number of rotations in each direction (`ROT_R`, `ROT_L`), then wait for the
 configured amount of minutes (`PAUSE_MIN`), and eventually restart the cycles. This will be refered to as "_winding_".
 
-In short:
+### The very short version of a manual:
 * press the button to start winding
 * long-press the button to stop winding
 
-### Switching Modes
+### Switching Modes (a.k.a the slightly longer version of a manual)
 * When pressing the button while the winder is in standby, it will start winding.
 * When long-pressing the button while it is winding, it will return to the home position and stop winding.
 * When long-pressing the button while it is waiting for the next cycle, it will stop winding.